Уноси

• An Integrated Intelligent CAD/CAPP Platform: Part I-Product Design Based on Elementary Machining Features (2022-10)

  S. Borojević, M. Milošević, D. Lukić, B. Borojević, An Integrated Intelligent CAD/CAPP Platform: Part I-Product Design Based on Elementary Machining Features, TECNOLOGIA Y CIENCIAS DEL AGUA ****-**** TEHNICKI VJESNIK-TECHNICAL GAZETTE, Vol. 29, No. 4, pp. 1301 - 1309, Oct, 2022

• Žune Ba-F epithermal deposit Part 1: Mineralogical and geochemical characteristics. (2022-10)

  A. Milošević, S. Borojević Šoštarić, M. Roglić, T. Brenko, Žune Ba-F epithermal deposit Part 1: Mineralogical and geochemical characteristics., GEOLOGIA CROATICA, Vol. 75, No. 3, pp. 393 - 410, Oct, 2022

• Идејно урбанистичко-архитектонско рјешење изградње пословног објекта и реконструкција, надоградња и надзиђивање постојећа два објекта у Улици Стефана Немање у Источном Новом Сарајеву (2006)

  D. Milanović, D. Borojević, L. Kevac, N. Samardžić, Идејно урбанистичко-архитектонско рјешење изградње пословног објекта и реконструкција, надоградња и надзиђивање постојећа два објекта у Улици Стефана Немање у Источном Новом Сарајеву, 2006

• Kolektivna izložba "Modularna koordinacija i kompozicija" (2013)

  E. Fejzić, D. Borojević, T. Vujičić, Kolektivna izložba "Modularna koordinacija i kompozicija", Univerzitet u Banjoj Luci Arhitektonsko-građevinski fakultet, 2013

• Publikacija: Modularna koordinacija i kompozicija (2013)

  E. Fejzić, D. Borojević, T. Vujičić, Publikacija: Modularna koordinacija i kompozicija, Univerzitet u Banjoj Luci Arhitektonsko-građevinski fakultet, 2013

• Analysis of cutting forces in hybrid turning aided by gas combustion heating of workpiece (2021-10)

  B. Sredanović, Đ. Čiča, S. Borojević, S. Tešić, D. Kramar, Analysis of cutting forces in hybrid turning aided by gas combustion heating of workpiece, ACTA TECHNICA CORVINIENSIS, Vol. 14, No. 4, pp. 29 - 33, Oct, 2021

• Capability of micro-milling in machining of difficult-to-cut materials (2021-12)

  B. Sredanović, Đ. Čiča, S. Borojević, S. Tešić, D. Kramar, Capability of micro-milling in machining of difficult-to-cut materials, International Scentific Journal Industry 4.0, Vol. 6, No. 6, pp. 218 - 221, Dec, 2021

• Experimental analysis and optimization of thin-walled tubular parts milling (2022-01)

  B. Sredanović, Đ. Čiča, S. Borojević, S. Tešić, D. Kramar, Experimental analysis and optimization of thin-walled tubular parts milling, Journal of production engineering, Vol. 25, No. 4, pp. 6 - 12, Jan, 2022

• Changes in Air Temperature and Precipitation in Sokolac (1961–2022) (2023)

  T. Popov, S. Gnjato, G. Trbić, M. Ivanišević, D. Borojević, M. Đorđević, Changes in Air Temperature and Precipitation in Sokolac (1961–2022), ГЛАСНИК/HERALD, Vol. 27, pp. 1 - 25, 2023

• Energy efficiency of the Process Planning Design in the scope of Industry 4.0 (2023-05)

  S. Borojević, B. Sredanović, M. Milošević, M. Sekulić, S. Janković, Energy efficiency of the Process Planning Design in the scope of Industry 4.0, Journal of physics. Conference series (Print), Vol. 2540, May, 2023

• Optimization of cutting parameters for minimizing specific cutting energy and maximizing productivity in turning of AISI 1045 steel (2019-12)

  B. Sredanović, Đ. Čiča, S. Borojević, S. Tešić, D. Kramar, Optimization of cutting parameters for minimizing specific cutting energy and maximizing productivity in turning of AISI 1045 steel, proceedings of IV International Scientific Conference Industry 4.0, pp. 283 - 286, Dec, 2019

• Energy consumption model of the face milling (2021-05)

  S. Tešić, Đ. Čiča, M. Zeljković, S. Borojević, B. Sredanović, G. Jotić, Energy consumption model of the face milling, Proceedings of 15th International Conference on Accomplishments in Mechanical and Industrial Engineering DEMI 2021, pp. 89 - 93, May, 2021

• Experimental analysis and optimization of thin-walled tubular parts milling (2021-09)

  B. Sredanović, Đ. Čiča, S. Borojević, S. Tešić, D. Kramar, Experimental analysis and optimization of thin-walled tubular parts milling, Proceeding of 14th International Scientific Conference MMA 2018, pp. 31 - 36, Sep, 2021

• Influence of cutting parameters on the tool life in end milling of biocompatible titanium alloy Ti6-Al4-V (2021-10)

  S. Tešić, M. Zeljković, Đ. Čiča, S. Borojević, B. Sredanović, Influence of cutting parameters on the tool life in end milling of biocompatible titanium alloy Ti6-Al4-V, Proceedings of 38th International Conference on Production Engineering Serbia ICPE 2021, pp. 96 - 101, Oct, 2021

• Education of production engineers for Industry 4.0 (2022-05)

  M. Sekulić, M. Milošević, A. Aleksić, S. Borojević, B. Sredanović, Education of production engineers for Industry 4.0, Proceedings of 10th International Scientific Conference on machine design in the context of Industry 4.0 intelligent products IRMES 2022, pp. 91 - 96, May, 2022

• Projektovanje i verifikacija grupnog tehnološkog postupka za operaciju struganja (2022-10)

  S. Borojević, Đ. Čiča, B. Sredanović, S. Tešić, M. Ćulum, Projektovanje i verifikacija grupnog tehnološkog postupka za operaciju struganja, Zbornik radova sa 43. JUPITER konferencije, pp. 11 - 16, Oct, 2022

• Production engineering curriculum in the context of Industry 4.0 – current state of art and necessary changes in AP of Vojvodina and Republic of Srpska (2022-12)

  M. Sekulić, M. Milošević, S. Borojević, B. Sredanović, A. Aleksić, J. Ilić, Production engineering curriculum in the context of Industry 4.0 – current state of art and necessary changes in AP of Vojvodina and Republic of Srpska, Proceedings of VII International Scientific Conference Industry 4, pp. 277 - 280, Dec, 2022

• Obrazovanje inženjera proizvodnog mašinstva za Industriju 4.0 – izazovi, šanse, mogućnosti (2023-02)

  M. Sekulić, M. Milošević, A. Aleksić, S. Borojević, B. Sredanović, Obrazovanje inženjera proizvodnog mašinstva za Industriju 4.0 – izazovi, šanse, mogućnosti, Zbornik radova sa XXIX skupa trendovi razvoja, Univerzitet pred novim izazovima TREND 2023, pp. 222 - 225, Feb, 2023

• Energy consumption analysis and parameter optimization in high-feed milling operation (2023-06)

  B. Sredanović, Đ. Čiča, S. Borojević, S. Tešić, D. Jokić, D. Kramar, Energy consumption analysis and parameter optimization in high-feed milling operation, Proceedings of 15th International Conference on Accomplishments in Mechanical and Industrial Engineering DEMI 2023, pp. 41 - 46, Jun, 2023

• Capability of micro-milling in machining of difficult-to-cut materials (2023-12)

  B. Sredanović, Đ. Čiča, S. Borojević, S. Tešić, D. Kramar, Capability of micro-milling in machining of difficult-to-cut materials, Proceedings of VI International Scientific Conference Industry 4.0, pp. 220 - 223, Dec, 2023